Fagor 8055i FL EN - WORKING WITH OPERATIONS OR CYCLES; Coordinates (X, Z).; Safety distance.

Operating manual
CNC 8055
CNC 8055i
WORKING WITH OPERATIONS OR CYCLES
3.
·TC· OPTION
SOFT: V02.2X
·171·
Profiling cycle
Geometry definition.
Profile definition.
Coordinates (X, Z).
X 230.0000 Z 180.0000
Safety distance.
X 0.0000 Z 0.0000
Roughing.
Finishing.
F 0.800 S 1000 T 3  0.25
Spindle.
Outside profile.
Type of machining.
Work quadrant.
Abscissa and ordinate of the starting point. Z = 170 X = 0
Section 1 Cntrclock- wise
arc
Zc = 140 Xc = 0 R = 30.
Section 2 Cntrclock- wise
arc
R = 350. Tangent = Yes
Section 3 Clockwise arc Zc = 50 Xc =190 R = 30. Tangent = Yes
The CNC shows the possible options for section 2. Select the correct one.
Section 4 Straight line Z = 20 X = 220 Tangent = Yes
The CNC displays the possible options between sections 3-4. Select the correct one.
Section 5 Straight line Z = 0 X = 220
F 1.000 S 1000 T 3  2
RPM