·62·
Operating manual
CNC 8055
CNC 8055i
2.
OPERATING IN JOG MODE
·TC· OPTION
SOFT: V02.2X
Live tool
2.8 Live tool
When a live tool has been selected, the standard screen of the TC mode offers the following
information:
Proceed as follows to select the "S" rpm of the live tool:
1. Press the [T] key to select the "T" field.
2. Press the [S] key or the [] key to select the "S" rpm of the live tool.
3. Entering the value manually. Key in the desired value and press [ENTER].
The keys for the live tool are:
Considerations about the live tool
The following considerations must be borne in mind when the machine has a live tool:
• Set one of general parameters P0 to P9 with a value of 13.
• The location code (shape) of the live tool must be 10, 20 or 30.
• The PLC must manage the keys for the live tool.
Every time one of these keys is pressed, the CNC updates the corresponding register bit.
bit 7 of register 561 (B7 R561)
bit 3 of register 562 (B3 R562)
bit 5 of register 562 (B5 R562)
To Next Page
Loading...
