·184·
Operating manual
CNC 8055
CNC 8055i
5.
OPERATING IN ISO MODE
·TC· OPTION
SOFT: V02.2X
Programming assistance
5.2.4 Mirror image
5.2.5 Scaling factor
The icons may be used to select the following options:
• Select the action to be carried out. It is possible to cancel the
active mirror image, define a new one canceling the previous
ones or define a new one and add it to the one that is currently
active.
• Select the axes on which mirror image is applied. This icon is
not shown when selecting mirror image cancellation.
The cycle internally generates an ISO block that contains a
combination of functions G10, G11 and G12.
An icon is used to indicate whether to cancel the existing scaling
factor or activate a new one. In the latter case, a numeric field is
displayed to define the value of the scaling factor.
The cycle internally generates a block with function G72.
To Next Page
Loading...
