Fagor 8055i FL EN - Page 55

Operating manual
CNC 8055
CNC 8055i
OPERATING IN JOG MODE
2.
·TC· OPTION
SOFT: V02.2X
·55·
Tool calibration
Define the rest of the data related to the tool.
The right window shows the tool geometry values and the left window shows help graphics. To define
one of these values, select the corresponding field, key in the desired value and press [ENTER].
15:28:42
Cutter angle
Cutter width
Cutting angle
Tool nose radius
A 0.0000
B 0.0000
C 0.0000
R 0.0000
Geometry
C
R
A
B
A=90
A=90
B=2R
A Cutter angle.
B Cutter width.
C Cutting angle.
R Tool radius.