·66·
Operating manual
CNC 8055
CNC 8055i
2.
OPERATING IN JOG MODE
·TC· OPTION
SOFT: V02.2X
Spindle control
6. Spindle gear currently selected.
This value cannot be changed when using an automatic gear change.
When not using an automatic tool changer, press the [S] key and then use the [] key to highlight
the current value. Enter the gear number to be selected and press [ENTER] or [START].
When the machine does not use spindle gears, this message makes no sense. That is why the CNC
does not show this message when text 28 of program 999997 has not been defined.
To Next Page
Loading...
