Fagor 8055i FL EN - WORKING WITH OPERATIONS OR CYCLES; Type of machining to be carried out on each corner.; Finishing stocks in X-Z.

·90·
Operating manual
CNC 8055
CNC 8055i
3.
WORKING WITH OPERATIONS OR CYCLES
·TC· OPTION
SOFT: V02.2X
Turning cycle
Type of machining to be carried out on each corner.
For a rounded corner, define the rounding radius (R); for a chamfer, define the distance from the
theoretical corner to the chamfer point (C).
Finishing stocks in X-Z.
2 different residual stocks may be defined, one for each axis (X, Z). To define these residual stocks,
place the cursor on the corresponding data, key in the desired value and press [ENTER].
To select the type of corner, place the cursor over this icon and press the two-color key.
*
R
R
C
C
C
Square corner. Rounded corner. Chamfered corner.