Feig Electronic OBID i-scan ID ISC.PR101 User Manual

OBID i-scan
®
System-Manual ID ISC.MR/PR/PRH101
FEIG ELECTRONIC GmbH Page 109 of 131 H60301-3e-ID-B.doc
9.1.9. STMicroelectronics (LRI64)
IC manufacturer identifier: 0x02
memory organization: 16 x 1 Byte = 128Bit
Number of blocks 5 (user area: 10...14)
Block size 1 byte
Command
Code
Function Mode Comment
non
addressed
addressed select
0x01 Inventory
√
---
0x02 Stay Quiet
√
-
√
-
0x22 Lock Multiple Blocks - - - -
WR-OPTION = 0 *
0x23 Read Multiple Blocks
√√ √
-
In non addressed mode DB-N
must be 1
0x24 Write Multiple Blocks
√√ √
-
DB-Size = 1,
WR-OPTION = 0
*
0x25 Select - - - -
0x26 Reset to Ready - - - -
0x27 Write AFI - - - -
WR-OPTION = 0 *
0x28 Lock AFI - - - -
WR-OPTION = 0 *
0x29 Write DSFID - - -
0x2A Lock DSFID - - -
0x2B Get System Information
√√ √
-
0x2C
Get Multiple Block Security
Status
---
The WR-OPTION will be set automatically by the FEIG Readers if the RW-OPTION pa-
rameter in “CFG8 General” is set to “00: automatically set” ”

Feig Electronic OBID i-scan ID ISC.PR101 Specifications

General

Brand	Feig Electronic
Model	OBID i-scan ID ISC.PR101
Category	Other
Language	English