OBID i-scan
®
System-Manual ID ISC.MR/PR/PRH101
FEIG ELECTRONIC GmbH Page 72 of 131 H60301-3e-ID-B.doc
6.1.11. [0x2A] Lock DSFI
This command locks the DSFID register in one or more Transponders.
The supported ISO15693 Host commands depend on the different ISO15693 Transponder types,
which are described in chapter 9.1. Supported ISO15693 Host commands for ISO15693 Transpon-
ders.
REQUEST-DATA
4 5 (6...13)
0x2A MODE UID
RESPONSE-DATA (STATUS = 0x95)
5
ISO15693
ERROR
MODE:
Bit: 7 6 5 4 3 2 1 0
Function 0 0 0 0 0 ADR
ADR:
b000 non-addressed
b001 addressed
b010 selected
UID:
Read-only serial number of the Transponder. The UID is required only in the addressed
mode.
ISO15693 ERROR:
ISO15693 ERROR code of Transponder response. This byte is only available if STATUS =
0x95.
Note:
• This command is only available for ISO15693 Transponders.
To Next Page
Loading...
Need help?
General