Feig Electronic OBID i-scan ID ISC.PR101 User Manual

OBID i-scan
®
System-Manual ID ISC.MR/PR/PRH101
FEIG ELECTRONIC GmbH Page 123 of 131 H60301-3e-ID-B.doc
Error-Code for ISO15693 Transponders
Hex-value
Response error code definition
0x01 The command is not supported, i.e. the request code is not recognized
0x02 The command is not recognized, for example: a format error occurred
0x03 The option is not supported
0x0F Unknown error
0x10 The specified block is not available (doesn’t exist)
0x11 The specified block is already locked and thus cannot be locked again
0x12 The specified block is locked and its content cannot be changed
0x13 The specified block was not successfully programmed
0x14 The specified block was not successfully locked
0xA0 - 0xDF Custom command error codes
all others reserved for future use

Feig Electronic OBID i-scan ID ISC.PR101 Specifications

General

Brand	Feig Electronic
Model	OBID i-scan ID ISC.PR101
Category	Other
Language	English