Feig Electronic OBID i-scan ID ISC.PR101 User Manual

OBID i-scan
®
System-Manual ID ISC.MR/PR/PRH101
FEIG ELECTRONIC GmbH Page 100 of 131 H60301-3e-ID-B.doc
9. Supported ISO15693 Host commands
9.1. Supported ISO15693 Host commands for ISO15693 Transponders
The command codes listed in the following table supports the various Transponder commands and
operations that are available for each ISO15693 Transponder type.
9.1.1. EM4135 EM MICROELECTRONIC
IC manufacturer identifier: 0x16
memory organization:
36 x 8 Byte = 2304 Bit
Number of blocks 48 (user area: 13...48)
Block size 8 byte
Command
Code
Function Mode Comment
non-ad-
dressed
addressed select
0x01 Inventory
√
--
0x02 Stay Quiet
√
-
√
-
0x22 Lock Multiple Blocks
√√ √ √
WR-OPTION = 0 *
0x23 Read Multiple Blocks
√
-
√√
DB-Size = 8
Security Status is always
0x00
0x24 Write Multiple Blocks
√√ √ √
DB-Size = 8,
WR-OPTION = 0
*
0x25 Select
√
-
√
-
0x26 Reset to Ready
√
-
√√
0x27 Write AFI - - - -
0x28 Lock AFI - - - -
0x29 Write DSFID - - - -
0x2A Lock DSFID - - - -
0x2B Get System Information
√√ √ √
0x2C
Get Multiple Block Secu-
rity Status
-- - -
∗ The WR-OPTION will be set automatically by the FEIG Readers if the RW-OPTION parameter
in “3.5. CFG4: Transponder Parameters”

Feig Electronic OBID i-scan ID ISC.PR101 Specifications

General

Brand	Feig Electronic
Model	OBID i-scan ID ISC.PR101
Category	Other
Language	English