Feig Electronic OBID i-scan ID ISC.PR101 User Manual

OBID i-scan
®
System-Manual ID ISC.MR/PR/PRH101
FEIG ELECTRONIC GmbH Page 95 of 131 H60301-3e-ID-B.doc
8.5. Texas Instruments ISO15693 Tag-it™ HF-I Standard/Pro/Plus Custom Commands
8.5.1. [0xA4] Kill (Tag-it™ HF-I Pro)
This command allows to irreversibly disable the functionality of the Transponder.
REQUEST-DATA
5 6 7-14 15-18
0xA2 MODE UID PASSWORD
RESPONSE-DATA (STATUS = {0x95})
5
ISO-ERROR
MODE:
Bit: 7 6 5 4 3 2 1 0
Function - - - - - ADR
ADR:
ADR
b001 addressed
UID:
Read only serial no. of the Transponder.
PASSWORD:
Password for execution the function successfully (LSB first).
ISO-ERROR:
ISO error code of Transponder response. This byte is only available if STATUS = {0x95}.
8.5.2. [0xA5] Write Single Block Pwd (Tag-it™ HF-I Pro)
This command allows a password protected write to the Transponder memory.
REQUEST-DATA
5 6 7-14 15-18 19 20-23
0xA5 MODE UID PASSWORD DB-ADR DB
RESPONSE-DATA (STATUS = {0x95})
5
ISO-ERROR
MODE:
Bit: 7 6 5 4 3 2 1 0
Function - - - - - ADR

Feig Electronic OBID i-scan ID ISC.PR101 Specifications

General

Brand	Feig Electronic
Model	OBID i-scan ID ISC.PR101
Category	Other
Language	English