Feig Electronic OBID i-scan ID ISC.PR101 User Manual

OBID i-scan
®
System-Manual ID ISC.MR/PR/PRH101
FEIG ELECTRONIC GmbH Page 50 of 131 H60301-3e-ID-B.doc
5.4. [0x65] Get Software Version
This protocol allows you to determine the software version of the Reader, its type and the types of the
Transponders which are supported by the software.
Host → Reader
1 2 3 4,5
5 COM-ADR [0x65] CRC16
Host ← Reader
1 2 3 4 5...6 7
13 COM-ADR [0x65]
STATUS
1
SW-REV D-REV
©
8 9 10-11 12,13
ª
HW-Type SW-TYPE TR-TYPE CRC16
SW-REV:
Revision status of the firmware.
D-REV:
Revision status of the development firmware. D-REV is set to ‘0’ in customized firmware revi-
sions.
HW-Type:
Displays options which are supported by the Reader Hardware
SW-TYPE:
Displays the type / model of the Reader
(see: ANNEX K: Codes of Reader Types)
TR-TYPE:
Displays the Transponders supported by the software.
Bit: 15 14 13 12 11 10 9 8
Function: - - - - - - - -
Bit: 7 6 5 4 3 2 1 0
Function: I-Code
UID
I-Code
EPC
- - ISO
15693
- - I-Code 1
1
see ANNEX D: Index of Status Bytes

Feig Electronic OBID i-scan ID ISC.PR101 Specifications

General

Brand	Feig Electronic
Model	OBID i-scan ID ISC.PR101
Category	Other
Language	English