Feig Electronic OBID i-scan ID ISC.PR101 User Manual

OBID i-scan
®
System-Manual ID ISC.MR/PR/PRH101
FEIG ELECTRONIC GmbH Page 88 of 131 H60301-3e-ID-B.doc
8.2.5. [0xA4] Lock
This command locks the KSW - TempSens.
REQUEST-DATA
5 6 (7-14) 7-12 (15-21)
0xA4 MODE UID Password
RESPONSE-DATA (STATUS = 0x95)
5
ISO-ERROR
MODE:
Bit: 7 6 5 4 3 2 1 0
Function - - - - - ADR
ADR:
ADR
b000 non-addressed
b001 addressed
b010 selected
UID:
Read only serial no. of the transponder. The UID is required only in the addressed mode.
ISO-ERROR:
ISO error code of transponder response. This byte is only available if STATUS = 0x95.
Note:
• The transponder responds with an ISO-Error whenever a write command is issued. It is also
not possible to read Block 0x46 and 0x47 (password)

Feig Electronic OBID i-scan ID ISC.PR101 Specifications

General

Brand	Feig Electronic
Model	OBID i-scan ID ISC.PR101
Category	Other
Language	English