Feig Electronic OBID i-scan ID ISC.PR101 User Manual

OBID i-scan
®
System-Manual ID ISC.MR/PR/PRH101
FEIG ELECTRONIC GmbH Page 60 of 131 H60301-3e-ID-B.doc
TR-TYPE:
Bit: 7 6 5 4 3 2 1 0
Function RF_TEC - - TYPE_NO
RF_TEC:
Indicates the RFID - Technology of the present Transponder:
b00: 13,56 MHz Transponder
b10: UHF Transponder
TYPE_NO
Displays the Transponder type of the present Transponder
(see: ANNEX A: Codes of Transponder Types).
DSFID: (only ISO15693 Transponders)
Data Storage Family Identifier. If not used this value will return 0x00.
UID:
• Read-only serial number of the Transponder.
EPC:
• For I-Code EPC Transponders: if 8 or 12 Bytes of the I-Code EPC are transmitted, dependents
on the I-Code EPC Transponder type.
UID:
• For UID Transponder: the 19 Byte Identifier Data (IDD) will be displayed.
Identifier Data (IDD):
User Data (Read/Write) UD CRC 16 (Read/Write) UID (ReadOnly)
DB 0-11 DB12-13 DB14-18
Notes:
• This command supports all Transponders.
• If ONT = b1 only the UID of those Transponders are read which came into the antenna field
since the last Inventory command.
• If ONT = b0 a RF-Reset is performed to read the UID of all Transponders inside the antenna
field.
• If the STATUS byte of the protocol frame has the value 0x94, more UID’s can be read out of
the Reader with MORE = b1.

Feig Electronic OBID i-scan ID ISC.PR101 Specifications

General

Brand	Feig Electronic
Model	OBID i-scan ID ISC.PR101
Category	Other
Language	English