A Diagnostic messages
234 Festo – GDCP-CMMS/D-FW-EN – 1404NH – English
Diagnostic messages
Unit_Diag_Bit ReactionMessageNo.
53 E060 “Overcurrent output
stage”
06-0 Over-current of the intermediate
circuit/output stage
PS off
54 E020 “Undervoltage power
stage”
02-0 Undervoltage in intermediate circuit configurable
55 E070 “Overvoltage output
stage”
07-0 Overvoltage in the intermediate circuit PS off
58 E03x “Overheating error
(Motor)”
03-1 Temperature monitoring, motor configurable
59 E040 “Overtemperat ure
power stage”
04-0 Excess/low temperature of power
electronics
configurable
61 E086 “SINCOS-RS485
communication”
08-6 Angle e ncoder communication error PS off
62 E088 “SINCOS track signals” 08-8 Internal angle encoder error PS off
60 E080 “Encoder supply” 08-0 Encoder supply error PS off
To Next Page
Loading...
Need help?
General
