Festo CPX-CMAX-C1-1 User Manual

Contents and general safety instructions
X
Festo P.BE−CPX−CMA X−CONTROL−EN en 0908NH
Safety instructions
When commissioning and programming positioning systems,
you must always observe the safety regulations in the
descriptions as well as the operating instructions for the
other components used.
The user must make sure that nobody is within the sphere of
influence of the connected actuators or axis system. Access
to the potential danger area
must be prevented by suitable
measures, such as barriers and warning signs.
Warning
Axes can move with high force and at high speed. Colli
sions can lead to serious injuries and damage to compo
nents.
Make sure that nobody can reach into the sphere of influ
ence of the axes or other connected actuators and that no
items are within the positioning range while the system
is
connected to energy sources.
Warning
Errors in the parameterisation can cause personal injuries
and damage to property.
Enable the controller only if the axis system has been cor
rectly installed and parameterised.

Festo CPX-CMAX-C1-1 Specifications

General

Brand	Festo
Model	CPX-CMAX-C1-1
Category	Controller
Language	English