B. Basic controlling principles
B−23
Festo P.BE−CPX−CMA X−CONTROL−EN en 0908NH
B.6 Optimisation of the mechanical structure and the pneumatic
installation
Check the system structure:
Check whether using a greater basic load (mass without
workpiece) improves the behaviour.
Check whether the mechanical connections:
Drive moving mass,
Drive measuring system,
Drive machine frame
are backlash−free.
Check whether the pneumatic installation fulfils the de
mands listed in the CMAX system description. Make sure
especially that the
supply pressure is stable, that the tub
ing is of the correct length and diameter and that the cor
rect screw connectors are used.
To Next Page
Loading...
Need help?
General
