Flexim FLUXUS F60 Series User Manual

13 Outputs
FLUXUS F60* 13.1 Configuration of an output using the adapter for the active current input
121
UMFLUXUS_F60xV5-0EN, 2017-10-16
When configuring an analog output, the output range is defined.
• Select other range to enter the output range manually.
• Press ENTER.
• Enter the value 4mA.
• Press ENTER.
• Enter the value 22 mA.
• Press ENTER.
• Select the list item Other value for the error output.
• Press ENTER.
• Enter the error value 22 mA.
• Press ENTER.
Activation of the output
• Select the channel for which an output is to be activated in the program branch Output
Options.
• Press ENTER.
• Press ENTER until Current Loop is displayed. Select yes to activate the output.
• Press ENTER.
After an analog output has been activated in the program branch Output Options, the
measuring range of the source item has to be entered.
• Select absolut.
• Press ENTER.
Special Funct.\SYSTEM settings\Proc. outputs\...\I1 Output range
Special Funct.\SYSTEM settings\Proc. outputs\...\I1 Output MIN
Special Funct.\SYSTEM settings\Proc. outputs\...\I1 Output MAX
Special Funct.\SYSTEM settings\Proc. outputs\...\Error-value
Output Options\...\Current Loop
Output Options\...\Meas.Values

Flexim FLUXUS F60 Series Specifications

General

Brand	Flexim
Model	FLUXUS F60 Series
Category	Measuring Instruments
Language	English