Fluke NetDAQ 2640A User Manual

2640A/2645A NetDAQ
Users Manual
4-4
To stop logging for an individual instrument, complete the following procedure:
1. Select the instrument’s icon.
2. Select Logging | Stop Instrument or click the Stop Instrument button on the
toolbar. If the menu command and button are dimmed, the instrument is not
logging, or it is a Slave and you must stop the Master.
Starting or Stopping all Instruments at Once 4-3.
To start logging for all of the instruments in the current setup, select Logging |
Start all Instruments or click the Start all Instruments button on the toolbar. If the
menu command and toolbar button are dimmed, the instruments are already
logging.
To stop logging for all instruments in the current setup, select Logging | Stop All
Instruments or click the Stop All Instruments button on the toolbar. If the menu
command and toolbar button are dimmed, the instruments are not logging.
Starting or Stopping a Group Instrument 4-4.
To start logging for a group instrument, complete the following procedure:
1. Select the icon for the Master instrument. If the icon says “LOG” or “SIM,”
the instrument is already logging.
2. Select Logging | Start Instrument or click the Start Instrument button on the
toolbar. If the menu command and the toolbar button are dimmed, the
instrument is already logging.
ds055s.bmp
To stop logging for a group instrument, complete the following procedure:
1. Select the icon for the Master instrument.
2. Select Logging | Stop Instrument or click the Stop Instrument button on the
toolbar. If the menu command and the toolbar button are dimmed, the
instrument is not logging.

Fluke NetDAQ 2640A Specifications

General

Brand	Fluke
Model	NetDAQ 2640A
Category	Test Equipment
Language	English