2640A/2645A NetDAQ
Users Manual
3-4
ds002s.bmp
Figure 3-1. NetDAQ Logger Main Window
Configuring Network Communications 3-5.
Before you can configure the instruments on your network and create setup files
for these instrument configurations, you must configure your network
communications. This involves identifying the instruments by their BCN numbers
and, on a general network, their IP addresses.
Network configuration data is not saved as part of the setup files but is its own
separate file, ccf.cfg, maintained by NetDAQ Logger. This file is common to
all setup files and any changes you make to the ccf.cfg file affect all setup files.
Each PC on which you install NetDAQ Logger has a ccf.cfg file.
To Next Page
Loading...
Need help?
General
