Fluke NetDAQ 2640A - Dynamic Data Exchange (DDE) Operations

2640A/2645A NetDAQ
Users Manual
4-12
Off-scale Reading
Y-Axis
Plot Maximum
Plot Minimum
Most Recent Plot Points
Units
Labels
Channel
Labels
Plot
Symbols
X-Axis
40 data points nn seconds apart where nn is the
Sampling Interval (1 to 3600 seconds)
Most Recent
Readings
Plot Channels
(eight maximum)
ds074c.eps
Dynamic Data Exchange (DDE) Operations 4-13.
Complete the following procedure to set up typical Dynamic Data Exchange
operations. See Appendix G “Dynamic Data Exchange (DDE)” for a DDE
example using Excel.
In the client application (for example, a spreadsheet application), enter the
following values to set up a DDE link:
Application or Service Name: NETDAQ (16-bit) or NETDAQ32 (32-bit)
Topic: BCNnn (nn is the instrument BCN 01 to 99)