2640A/2645A NetDAQ
Users Manual
1-14
Host Computer Requirements 1-26.
The host computer used for instrument operations must meet the following
minimum requirements:
• IBM PC with an Intel 386 microprocessor or greater, running Windows 95,
Windows NT, or Windows 3.1.
• Color VGA Monitor.
• A Hard disk drive with 2 MB of free disk space.
• A 1.44 Mbyte (3 1/2-inch) floppy disk drive.
Options and Accessories 1-27.
Table 1-1 summarizes the available Models, Options and Accessories, including
measurement transducers, software, connector sets, Ethernet adapters, cables, and
components.
Table 1-1. Models, Options and Accessories
Model Description
2640A NetDAQ Networked Data Acquisition Unit
2645A NetDAQ Networked Data Acquisition Unit
2640A-911 NetDAQ Logger for Windows
2640A-912 NetDAQ Logger with Trending
264XA-903 NetDAQ Developer’s Toolbox
2600A-904 Trend Link for Fluke
264XA-801 Ethernet Card (10Base2, 10BaseT)
264XA-802 Parallel-to-LAN Adapter (10Base2)
264XA-803 PCMCIA Adapter (10Base2, 10BaseT)
2640A-913 Newt Networking Software
2620A-100 Input Module Option
2620A-101 4-20 mA Current Shunt Strip
942615 NetDAQ
Service Manual
Y2641 19” Rackmount Kit Single/Dual
Y2642 Wall/Cabinet Mounting Plate
Y2643 4-meter Cable Kit
Y2644 NEMA 4X (IP65) Enclosure
To Next Page
Loading...
