2640A/2645A NetDAQ
Users Manual
J-2
invalid values into the fields of a dialog box. If a critical instrument error occurs
(RAM constants failure or A/D not responding), a modeless window appears with
a warning message. For a description of each error message, refer to Error and
Status Messages in the online help.
Error and Status Messages J-6.
NetDAQ Logger displays three types of messages: Verification, Exclamation, and
Information.
Verification messages (below is typical) ask you to verify your operation. Click
the Yes or No button. No cancels the operation.
ds309s.bmmp
Exclamation messages (below is typical) notify you of an operational error. Click
the OK button in acknowledgment.
ds310s.bmp
Information messages (the example below is typical) provide information or
notify you of a non-allowed operation. Click the OK button in acknowledgment.
ds311s.bmp
Error and status messages are summarized below in alphabetical order. Locate the
message and then read the Explanation for more information.
To Next Page
Loading...
Need help?
General
