FOR-A MFR-3000 - Page 5

5
Upon Receipt
Unpacking
MFR-3000 units and their accessories are fully inspected and adjusted prior to shipment.
Operation can be performed immediately upon completing all required connections and
operational settings.
Check your received items against the packing lists below. Check to ensure no damage has
occurred during shipment. If damage has occurred, or items are missing, inform your supplier
immediately.
 Main Unit
ITEM
QTY
REMARKS
MFR-3000
1
AC Cord
1 set
AC cable and retaining clip
Rack Mount Brackets
1 set
EIA standard type (Attached to unit.)
Rubber Feet
4
CD-ROM
1
Operation manual (PDF)
Notes on serial port setting
1
Quick Setup Guide
1
 Input / Output Cards
ITEM
QTY
REMARKS
MFR-8SDI
1 - 8 *
8 SDI input card
MFR-8SDO
1 - 8 *
8 SDI output card
MFR-8AAI
1 - 8 *
Analog audio input card with A/D converter
(Analog 8 stereo pairs)
MFR-8AAO
1 - 8 *
Analog audio output card with D/A converter
(Analog 8 stereo pairs)
MFR-8AESI
1 - 8 *
AES audio input card
(AES/EBU 8 stereo pairs)
MFR-8AESO
1 - 8 *
AES audio output card (AES/EBU 8 stereo
pairs)
MFR-16MV
1 - 4 *
16 SDI output card with multiviewer function.
MFR-8SDIGB
1 - 8 *
SDI input card (Gearbox 2ch built-in)
MFR-8SDOGB
1 - 8 *
SDI output card (Gearbox 2ch built-in)
* The number of installed cards varies depending on the system configuration. See the Matrix Size Chart
on page 11
 Options (for MFR-3000)
ITEM
QTY
REMARKS
MFR-30CPU
1
Redundant CPU card *
MFR-30PS
1 set
Redundant power supply unit (with AC cord
and AC cord retaining clip.)
MFR-30FP
1
Front control panel
MFR-18RUA/39RUA
MFR-39RU/40RU/18RU
MFR-16RU/16RUD/16RUTA
MFR-16/32/64RUW
1
Remote Control Unit