96
5-8-2. Changing the RU Network Settings
(1) Press SETUP to enter Setup Menu mode. The RU IP address and subnet mask are
displayed as shown below. (If Button A is off (unlit), press Button A.)
(2) Press and hold down a button below the number for change. The number will blink.
(3) Turn the control knob to change the number value. To clear the number setting, press and
hold down the button.
(4) Repeat steps (2) and (3) to change the IP address.
(5) When a number is changed, the SAVE button will blink. Press and hold down SAVE to
confirm the change. The Remote Control Unit will automatically restart.
To cancel the process, display another information without pressing SAVE.
5-8-3. Rebooting MU PC-LAN
(1) Press Button C in Setup Menu mode.
(2) Press and hold down the REBOOT button shown below. The EXEC button will appear.
(3) Press and hold down EXEC. The "PC-LAN Startup" message is displayed during
rebooting. The message will disappear when the reboot is complete.
POWER
BUSY SETUP
LOCK RESET
MFR-18RU
REMOTE CONTROL UNIT
POWER
BUSY SETUP
LOCK RESET
MFR-18RU
REMOTE CONTROL UNIT
POWER
BUSY SETUP
LOCK RESET
MFR-18RU
REMOTE CONTROL UNIT
To Next Page
Loading...
Need help?
General
