3.4 Programming Mode
3-42
LED monitor
(item No.)
Item Description
6_15
No. of consecutive
occurrences
The number of times the same alarm occurs consecutively.
6_16
Multiple alarm 1
Simultaneously occurring alarm codes (1)
("----" is displayed if no alarms have occurred.)
6_17
Multiple alarm 2
Simultaneously occurring alarm codes (2)
("----" is displayed if no alarms have occurred.)
6_18
Terminal I/O signal status
under communications control
(displayed with the ON/OFF of
LED segments)
6_19
Terminal input signal status
under communications control
(in hexadecimal format)
6_20
Terminal output signal status
under communications control
(in hexadecimal format)
Shows the ON/OFF status of the digital I/O terminals under
RS-485 communications control. Refer to "Displaying control I/O
signal terminals under communications control" in Section 3.4.5
"Checking I/O signal status" for details.
6_21
Error sub code Secondary error code for the alarm.
6_22
Running status 2
Running status 2 is displayed in 4-digit hexadecimal format. Refer
to "Displaying running status (
3_07
) and running status 2
(
3_23
)" in Section 3.4.4 "Monitoring the running status."
6_23
Detected speed Speed detected value appears.
When the same alarm occurs repeatedly, the alarm information for the first and the most recent
occurrences will be preserved and the information for other occurrences in-between will be
discarded. The number of consecutive occurrences will be preserved as the first alarm
information.
To Next Page
Loading...
