5.2 Function Code Tables
5-4
Difference in display formats between the standard keypad and the multi-function keypad
Because the multi-function keypad displays in a larger number of digits than the standard keypad, display
formats have been changed for enhanced visibility of data.
Note that display formats have been changed as follows:
Table 5.2-4
Function
Code
Name Standard keypad
Multi-function keypad
(TP-G1-J1, TP-G1-C1)
H42
Capacitance of DC link bus capacitor
H44
Startup Counter for Motor 1
H47
Initial capacitance of DC link bus capacitor
H79
Preset startup count for maintenance (M1)
A52
Startup Counter for Motor 2
b52
Startup Counter for Motor 3
r52
Startup Counter for Motor 4
d15
Feedback Input (Encoder pulse
resolution)
d60
Command (Pulse Rate Input) (Encoder
pulse resolution)
Hexadecimal (HEX)
indication
Decimal indication
H43
Cumulative run time of cooling fan
H48
Cumulative Run Time of Capacitors on
Printed Circuit Boards
H77
Service Life of DC Link Bus Capacitor
(Remaining time)
H78
Maintenance interval (M1)
H94
Cumulative Motor Run Time 1
A51
Cumulative Motor Run Time 2
b51
Cumulative Motor Run Time 3
r51
Cumulative Motor Run Time 4
Indicated in the unit of
10 hours
Indicated in the unit
of 1 hour
d78
Synchronous operation
(deviation detection excess range)
Indicated in the unit of
10 pulses
Set values of 10000
or larger are indicated
by the "x10" LED on,
combined with
indication in the unit of
100 pulses.
Indicated in the unit
of 10 pulses
To Next Page
Loading...
