1.1 Features
1-8
5. List of inverter types
* If you place an order for the FRN55GX1S-2J or FRN55GX1S-4J specified for HD mode, the inverter is delivered
with no built-in DC reactor (DCR); if specified for LD mode, it is delivered with a built-in DCR as standard.
* EMC filter built-in type and DC reactor built-in type are also available. Consult your Fuji Electric representative.
For details, see Fuji Synchronous Motors & Inverter Synchronous Drive Systems Catalog (MH618) and/or
Permanent Magnet Type Synchronous Motor Drive FRENIC-MEGA Instruction Manual (INR-SI47-1502).
z
Position control response type (Built-to-order)
- Optimal for use in multi-story warehouses or for simplified PTP control.
- It is capable of positioning by full-closed control (feeding back outputs from the laser distance sensor
and encoder).
- Suppresses low-frequency vibration during deceleration stop by damping control (shortens the tact
time).
- Other available functions include return to the home position, OT processing, location presetting, etc.
z
Braking circuit built-in type (Built-to-order)
Because a braking circuit is installed for ≤ 22 kW as a standard setting, this type can be applied to vertical
carrier machines, etc, with many applications with regenerative load. (Braking resistor is also built in for
≤ 7.5 kW.)
* A braking circuit built-in type is also available for the capacity of 200 V, 30 kW to 55 kW, or for 400 V,
30 kW to 160 kW, on a built-to-order basis.
To Next Page
Loading...
