11.4 Option
11-35
Chapter 11 SELECTING PERIPHERAL EQUIPMENT
(4) Converter configuration
Table 11.4-10
(*1) The charging box (CU) contains the charging resistor (R0) and fuse (F). If the charging box (CU) is not used, the charging resistor (R0) and fuse (F)
must be prepared separately.
(*2) This filtering capacitor consists of two capacitors. When a single unit of filtering capacitor is ordered, a set of two capacitors will be delivered.
(*3) (*4) When the carrier frequency is decreased or the OPC-VG7-SIR is used, the generated loss will be increased. Therefore, use SC-N4/SF for (*3) and
SC-N8 for (*4), respectively.
To Next Page
Loading...
