Copy
104
Copy
3
1 Select a paper size and a paper type.
z
Select [ ] to return to the previous screen or [ ] to move to the next screen.
z
Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how to drag or
flick, refer to "Touch Screen" (P.74).
When [Custom Size] is Selected
Enter the width and length of the original document on the fields displayed after selecting
[Custom Size].
Specify the X (width) in the range from 98 to 483 mm, and the Y (length) in the range from
89 to 320 mm in 1 mm increments.
z
If the X (width) of non-standard size paper is less than 140 mm, documents may not be copied properly.
z
When copying on both sides of non-standard size paper, specify the size in the range from 140 to 483 mm for
the X (width) direction and from 128 to 320 mm for the Y (length) direction.
1 Enter a paper size using [+] and [-] or the numeric keypad.
2 Select a paper type.
z
Select [ ] to return to the previous screen or [ ] to move to the next screen.
z
Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how to drag or
flick, refer to "Touch Screen" (P.74).
Output Color (Selecting the Color for Copying)
This feature allows you to select copy colors.
z
If the use of certain colors is not allowed, the available colors will be restricted. For more information, refer to
"Tools" > "Accounting" > "Create/View User Accounts" > "Service Access" in the Administrator Guide.
To Next Page
Loading...
Need help?
General
