Job Status
502
Job Status
11
îš‹ Print and Save
Starts printing the job. After printing, the job remains undeleted.
îš‹ Cancel
Cancels printing the job.
Private Charge Print
This feature allows you to temporarily store print data in the machine for each
authentication user ID, and request on the machine's control panel to print the data. As the
feature enables you to select and print only necessary jobs, you can avoid printing
unnecessary jobs. Furthermore, the machine displays only the jobs of authenticated users
and their associated sub users to securely protect the privacy of the users.The Private Print
feature is suitable for authenticating and managing specific users managed by the system
administrator.
If received print jobs are set to be saved with Private Charge Print, the jobs are saved for
each authentication user ID.
z
An application (sold separately) is required to use the feature that associates sub users with the user ID of a
login user. For more information, contact our Customer Support Center.
z
[Private Charge Print] is displayed when [Receive Control] in [Charge/Private Print Settings] is set to either of
the following:
z
Select [According to Print Auditron] in [Receive Control], and then select [Save as Private Charge Print Job]
in [Job Login Success].
z
Select [Save as Private Charge Print Job] in [Receive Control].
z
When the Private Charge Print feature is selected, you cannot specify normal print, Secure Print, Sample Set,
Delayed Print on the print driver.
z
The Private Charge Print feature restricts the use of the machine through either user ID authentication or card authentication
(only the IC Card Reader (optional) is available), or the combination of both. For information on the types of authentication, refer
to " Authentication and Accounting Features" > "Overview of Authentication and Accounting Feature" > "Types of Authentication"
in the Administrator Guide.
z
To delete a print job instructed with an invalid user ID, display the list of print jobs after logging in as a system
administrator, and then select the job to be deleted. For more information, refer to "Maintenance" > "Deleting
a Private Charge Print Job with an Invalid User ID" in the Administrator Guide. For information on how to set
a User ID, refer to "Tools" > "Authentication/Security Settings" > "Authentication" > "Charge/Private Print
Settings" in the Administrator Guide.
The following describes how to print or delete a job stored with the Private Charge Print
feature.
1 Press the <Log In/Out> button on the control panel, or select the login information field on
the touch screen.
To Next Page
Loading...
Need help?
General
