Product Overview
50
Product Overview
2
3 Press the main power switch to the [ | ] position to switch the main power on.
The <Main Power> indicator lights up on the control panel.
4 Close the front cover.
Switching the Power On
The following describes how to switch the power on.
The machine takes approximately 30 seconds to warm up and to be ready to copy or print
after switching the power on. This may take more time depending on your machine
configuration.
Switch the power off at the end of the day or when not using the machine for an extended
period of time.
You can also use the Power Saver feature to save power consumption while the machine is
not in use.
z
For information on the Power Saver feature, refer to "Power Saver Mode" (P.56).
z
If the power is switched off, all the services of the machine will stop. When using the machine throughout the
day for jobs such as receiving faxes, do not switch the power off.
To Next Page
Loading...
Need help?
General
