Copy
94
Copy
3
1 Use [ ] and [ ] to set a density level.
2 Pages per Side (Copying Two Pages onto One Sheet)
This feature allows you to copy two pages of a document together onto one side of a single
sheet of paper.
When you select [2 Pages per Side], [Auto %] is automatically selected in [Reduce/Enlarge].
The machine automatically sets the copy ratio and makes copies of the images so that they
fit on the selected paper.
z
When you deselect [Auto %] in [Reduce/Enlarge] (when you select another copy ratio), image loss may occur
depending on the image size of the document.
z
Select a tray other than [Auto Select] in [Paper Supply]. When you select [Auto Select], the tray containing A4
paper is selected. If no tray contains A4 paper, the machine selects a tray based on the [Auto Paper Off]
setting. For information on [Auto Paper Off], refer to "Tools" > "Copy Service Settings" > "Copy Control" >
"Auto Paper Off" in the Administrator Guide.
z
When you copy both sides of the 2-sided document to one side and the document size is bigger than A4, the
orientation of the copied images may not be appropriate. To achieve the copy result with the correct
orientation, scan Side 1 and Side 2 separately in different orientations, using the document glass.
z
For information on how to copy four or eight pages of a document together onto one side of a single sheet of paper, refer to "Pages
per Side (Copying Multiple Pages onto One Sheet)" (P.110).
1 Select [2 Pages per Side].
1 Staple
This feature allows you to select whether to staple copied outputs at the top left corner.
The number of sheets that can be stapled is 2 to 50 (when 80 gsm paper is used). Available
paper types are: Bond, Plain, Recycled, Plain Reload, Lightweight, Heavyweight,
Heavyweight Reload, Extra Heavyweight (170 to 220 gsm), Extra Heavyweight (170 to 220
To Next Page
Loading...
Need help?
General
