Receiving Faxes
295
Fax
4
Receiving Faxes
Two modes are available for receiving faxes: Auto Receive and Manual Receive.
In the Auto Receive mode, reception of a fax from a remote machine begins automatically.
In the Manual Receive mode, reception of a fax from a remote machine is manual. This
mode is convenient for confirming the sender or using an external telephone to confirm
whether it is a fax before beginning reception.
Using G3 ID allows the machine to reject faxes from specific fax numbers or unknown fax
numbers. You can register up to 50 fax numbers as rejected fax numbers.
z
Rejecting faxes from specific fax numbers
The machine rejects faxes when the G3 ID sent from the sender’s machine is included in
the registered fax numbers to be rejected.
z
Rejecting faxes from unknown fax numbers:
The machine rejects faxes when the G3 ID is not sent from the sender’s machine.
G3 ID contains a phone number and other information that are registered in the
sender’s machine.
z
For IP Fax (SIP), the Manual Receive mode is not available.
z
You can change the default value of [Fax Receiving Mode] in the System Administration mode. For information on how to change
the default value, refer to "Tools" > "Fax Service Settings" > "Fax Control" > "Fax Receiving Mode" in the Administrator Guide.
z
For information on how to reject faxes from specific fax numbers or unknown fax numbers, refer to "Tools" >
"Fax Service Settings" > "Fax Control" > "Block Inbound Faxes" and "Block Unknown Fax Numbers" in the
Administrator Guide.
Switching between Auto Receive and Manual Receive
1 Press the <Machine Status> button.
2 Select [Fax Receiving Mode] on the [Machine Information] screen.
To Next Page
Loading...
Need help?
General
