Output Format
171
Copy
3
4 holes
ID Card Copy (Copying Both Sides of an ID Card)
This feature allows you to copy both sides of a small undetectable original, such as an ID
card, onto one side of paper.
1 Specify the orientation of the document in [Original Orientation] on the [Layout
Adjustment] screen.
2 Place the document slightly away from the top left corner of the document glass, and close
the document glass.
z
Always use the document glass when copying. You cannot use the document feeder with this feature.
z
Specify the orientation of the original document correctly.
z
If the edges of the image are missing, slightly move the card inward on the document glass so that the whole
image can be scanned.
z
When the reduced size is specified to copy an ID card, the machine may copy the ID card in a different
orientation from the original orientation depending on the magnification ratio specified. For information on
4 Holes 4 Holes
Top
4 Holes
Right
A4 , A4 Cover ,
7.25 x 10.5" , 8.5 x 11" ,
9 x 11" , 16K
A3, 11 x 15", 11 x 17", 8K
Original document
Original orientation
Copied output
Front side
Front side
Back side
Back side
To Next Page
Loading...
