Copy
170
Copy
3
* : The staple orientation displayed on the touch screen differs from the actual staple orientation. Outputs are stapled in the
orientation shown in the above table.
Paper Size and Punching Position (Finisher B1, C3 Finisher, C3 Finisher with Booklet Maker)
This feature is available when the 2/4 Hole Punch Kit for C3 Finisher (optional) or the US 2/
3 Hole Punch Kit for C3 Finisher (optional) is installed.
z
The distance between the two holes of the 2/4 Hole Punch Kit for C3 Finisher is 80 mm for both 2 and 4 holes.
z
The distance between the two holes of the US 2/3 Hole Punch Kit for C3 Finisher is 70 mm for 2 holes and
108 mm for 3 holes.
îš‹ 2 holes
îš‹ 3 holes
4 Staples 4 Top 4 Right
A3, A4 ,
A4 Cover ,
11 x 17", 11 x 15",
8.5 x 11" , 9 x 11"
2 Holes 2 Holes
Top
2 Holes
Right
A4 , A4 Cover , B5 ,
7.25 x 10.5" , 8 x 10" ,
8.5 x 11" , 9 x 11" , 16K
A4, A3, B4, 8 x 10", 8.46 x 12.4",
8.5 x 11", 8.5 x 13",
8.5 x 14", 11 x 15", 11 x 17", 8K
3 Holes 3 Holes
Top
3 Holes
Right
A4 , A4 Cover , B5 ,
7.25 x 10.5" , 8 x 10" ,
8.5 x 11" , 9 x 11" , 16K
A3, B4, 11 x 15", 11 x 17", 8K
To Next Page
Loading...
Need help?
General
