Store & Send Link
385
Scan
5
4 Select a feature on the [Store & Send Link] screen.
Scan To (Displaying the E-mail Address of the Authenticated User)
Automatically obtains the pre-registered e-mail address of the authenticated user.
From (Displaying the E-mail Address of the Authenticated User)
Automatically obtains the pre-registered e-mail address of the authenticated user.
Subject (Setting the Subject)
You can specify the e-mail subject using the following procedure.
îš„ Auto Set
Automatically sets the subject to [Scan Reference from XXX] (where XXX is the host name
of the machine).
îš„ To set a user-defined subject
1 Select [Subject].
2 Enter a subject with up to 128 characters using the displayed keyboard.
z
For information on how to enter characters, refer to "Entering Text" (P.77).
Message (Entering the E-mail Body)
You can enter the e-mail body using the following procedure.
1 Select [Message].
2 Enter a message with up to 512 characters using the displayed keyboard.
z
For information on how to enter characters, refer to "Entering Text" (P.77).
Color Scanning (Selecting an Output Color)
You can set the color mode to scan a document.
z
For more information, refer to "Color Scanning (Selecting an Output Color)" (P.338).
To Next Page
Loading...
Need help?
General
