Copy
109
Copy
3
[Non-target Area Color] Screen
This screen allows you to select the color to be used in place of the colors other than the
selected source colors. You can select one color from seven preset and six custom options.
z
For information on how to set custom colors, refer to "Tools" > "Copy Service Settings" > "Custom Colors" in the Administrator
Guide.
1 Select [Dual Color].
2 Select [Non-target Area Color].
3 Select any color.
[Output Color - Color] Screen
This screen allows you to specify the color to be used for single-color copying regardless of
the colors in the original document.
You can select one color from six preset and six custom options for [Single Color].
z
For information on how to set custom colors, refer to "Tools" > "Copy Service Settings" > "Custom Colors" in the Administrator
Guide.
To Next Page
Loading...
Need help?
General
