Job Assembly
179
Copy
3
2 Select [On].
îš„ Off
No sample set is made.
îš„ On
A sample set is made.
[Copy] Screen When Sample Job is in Progress
After the sample set is copied, the machine pauses the job and displays the [Copy] screen.
îš„ Change Quantity
Displays the [Change Quantity] screen on which you can change the number of copies
entered before. Enter a new quantity using the numeric keypad. The new value must
include the number of the sample set that has already been printed. When reducing the
quantity, specify a value between 1 (sample set) and the number of copies entered before.
z
If you specify "1" as a new quantity and then press the <Start> button, the machine will not process the job.
îš„ Change Settings
Displays the [Change Settings] screen. To cancel the settings you have made, deselect the
check box for the feature you want to cancel.
îš„ Delete
The remaining copies are canceled.
îš„ Start
The remaining copies are made.
z
You can also press the <Start> button on the control panel to perform the same operation.
To Next Page
Loading...
Need help?
General
