Fax
208
Fax
4
2 Select any option.
3 Enter the e-mail address of the target folder in the following format:
z
If the hard disk capacity of the machine becomes full during Internet Fax transmission, the transmission is
canceled and the document data is deleted.
z
If the hard disk capacity of the machine becomes full during scanning of a document, a screen appears to
prompt you to select whether to send the job up to the stored pages or to cancel the job. Select one of the
processes.
Sending Internet Fax to regular fax machines via a relay station
By specifying e-mail addresses in a specific format, you can send a document to regular fax
machines (that do not support the Internet Fax service) via a network.
This feature enables the machine to first send a document to an Internet Fax-compatible
machine (fax gateway) by e-mail via the Internet. The e-mail document is then converted
to a fax document on the Internet Fax-compatible machine, and is forwarded to its
destinations. If you locate the fax gateway and regular fax machines within an area where
the same local rate applies, the fax transmission costs can be reduced.
z
This feature is available only when the fax gateway can receive e-mail via SMTP.
z
The e-mail received by the fax gateway is deleted even if the fax was not correctly sent.
z
The setting specified in [Starting Rate] on the [Fax/Internet Fax Options] screen is used as the
communication mode from the fax gateway to the destination fax machine.
z
You can restrict fax forwarding in [Fax Transfer from Address Book] and [Fax Transfer Maximum Data Size] in
the System Administration mode.
1 Select [Internet Fax].
2 Select any option.
Example: Folder number: 123
(Enter the digits of the folder number to match those of the recipient)
Host name of the receiving machine: myhost
Domain name of the receiving machine: example.com
BOX123 @myhost. example.com
BOX (fixed characters to
indicate folder) + folder
number
@ + host name of the
receiving machine
Domain name of the
receiving machine