Fax
210
Fax
4
z
On the machine receiving the fax in a folder and forwarding an Internet fax
Creating a job flow sheet to specify a forwarding address and then making a link
between the job flow sheet and the folder.
z
For information on how to create a job flow, refer to "Tools" > "Setup" > "Create Job Flow Sheet" in the Administrator Guide.
z
Do not set the address of the machine as the forwarding address.
z
You can register up to 100 forwarding addresses.
z
[Folder Number] and [Passcode] are required by the sender. Inform the sender of the settings.
z
If the fax you received is a JBIG-compressed image, and if the Internet Fax profile of the forwarding
destination is set to TIFF-F, the image is converted into MH format when forwarding. Also, if the Internet Fax
profile is TIFF-S, the fax image is forwarded as is without changing the size and resolution settings.
z
If the hard disk capacity in the machine becomes full while the machine is receiving an Internet fax, the
reception is canceled and the partly received file is deleted.
z
If there is a problem with the data during Internet Fax forwarding, the forwarding is canceled and the
received file is stored in the folder.
z
If forwarding using SMTP fails, the received file is stored in the folder.
z
You can confirm the forwarding result in a Job History Report.
To Next Page
Loading...
Need help?
General
