Fax
288
Fax
4
z
Address number
An address number for the relay recipients registered at the relay station
The wildcard "*" can also be used.
z
You can register the above dialing format in an address number to send using the address number. For information on how to
register address numbers, refer to "Tools" > "Setup" > "Add Address Book Entry" in the Administrator Guide.
2 Select [+ Add] to perform Multiple Relay Broadcast.
z
You can specify up to 20 locations for relay recipients.
3 Press the <Start> button.
îš„ Manual Send (Transmitting with picking up the receiver or on-hook)
1 Select the [More Options] tab to display the [More Options] screen.
2 Pick up the telephone receiver, or select [On-hook (Manual Send/Receive)].
3 Select [Manual Send] from the drop-down menu.
4 Use the keyboard displayed on the touch screen to enter numbers in the following format.
z
You can specify up to 20 locations for relay recipients.
Relay station
telephone
number
Facsimile tone Beep! Password
Relay
station
ID
Address
number
Beep!
To Next Page
Loading...
Need help?
General
