Scan
310
Scan
5
îš„If you have more documents
If you have more documents to scan, select [Next Original] on the touch screen while the
current document is being scanned. This allows you to scan the documents as a single set of
data.
Up to 999 pages can be stored.
z
If the number of pages scanned by the machine exceeds the maximum, the machine stops scanning. Follow
the message displayed on the screen, and either abort the operation or save the already-scanned data as a
single set of data.
z
For information on how to set the maximum number of pages stored for a scan document, refer to "Tools" > "Scan Service Settings"
> "Other Settings" > "Maximum Stored Pages" in the Administrator Guide.
2 While documents are being scanned, select [Next Original].
z
When using the document feeder, load the next document after the machine has finished scanning the first
document.
z
When [Next Original] is displayed on the screen and no operation is performed for a certain period of time,
the machine automatically assumes that there are no more documents.
z
You can change the scan settings of the next document by selecting [Change Settings] that is displayed after
selecting [Next Original].
3 Load the next document.
4 Press the <Start> button.
If you have more documents, repeat steps 3 and 4.
To Next Page
Loading...
Need help?
General
