Chapter 8 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
141
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Detecting Vertical Streaks [Vertical Streak
Detection]
Select whether to enable or disable vertical streak detection.
After enabling this setting, the detection result is notified to
your computer when there is a possibility of a vertical streak
occurring in the images that are scanned through the ADF.
Check the notification and clean the glass sections.
For details about cleaning, refer to "Chapter 5 Daily Care"
(page 62).
1 Start up the Software Operation Panel.
For details, refer to "8.1 Starting Up the Software Operation Panel"
(page 108).
2 From the listing on the left, select [Device Setting 2]
[Vertical Streak Detection].
3 Select whether to enable or disable vertical streak
detection.
When you select [Enable], the scanner detects vertical streaks (dirt
on the glass) during scanning with the ADF.
8.9 Settings Related to Scanner Maintenance
To Next Page
Loading...
