Fujitsu Fi-7030

Appendix
Chapter 7 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
83
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
■Chip Error
The letter "C" and an alarm number appear alternately.
■Motor Circuit Error
The letter "H" and an alarm number appear alternately.
■Sensor Error
The letter "L" and an alarm number appear alternately.
Display Description Action
C0 A memory error
occurred.
Turn the scanner off then back on.
If the problem persists, write down
the displayed error code and
contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.
C8 An internal
communication error
of the scanner
occurred.
Display Description Action
H0 A motor circuit error
occurred.
Turn the scanner off then back on.
If the problem persists, write down
the displayed error code and
contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.
H7 A lamp circuit error
occurred.
Display Description Action
L6 A sensor error
occurred.
1 Clear any paper dust around the
ultrasonic sensors.
2 Turn the scanner off then back
on.
If the problem persists, write
down the displayed error code
and contact your FUJITSU
scanner dealer or an authorized
FUJITSU scanner service
provider.