Introduction
Glossary
Appendix
Glossary
Index
Contents
TOP
156
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Intelligent Multifeed Function
A function that excludes certain patterns of overlapping of documents that is detected as multifeed, by letting the scanner
memorize the overlap pattern.
For instance, when there is paper of the same size attached to a designated location on the page, the scanner memorizes
the location of the attachment and can be configured not to detect multifeeds for that location.
Interface
The connection that allows communication between the computer and the scanner.
Inversion
A scanning method in which the black part and the white part of the image are inverted.
ISIS
ISIS (Image Scanner Interface Specification) is an API (Application Program Interface) standard for imaging devices (such
as scanners and digital cameras) which was developed by Captiva, a division of EMC Corporation (the former Pixel
Translations) in 1990. In order to use devices that comply with this standard, it is necessary to install a driver software that
supports ISIS standard.
J
Job Separator
A sheet to insert between documents in a batch for separating different jobs.
The following types of job separators are available:
Job separator with patch codes:
A sheet with patch codes printed.
Job separator with barcodes:
A sheet with barcodes printed.
L
Landscape
Orientation in which the short side of the document is set parallel to the feed direction.
To Next Page
Loading...
