Appendix
Glossary
Introduction
Index
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
Replacing the
Consumables
Chapter 6 Replacing the
Consumables
This chapter describes how to replace the consumables for the scanner.
6.1 Consumables and Replacement Cycles.....................................................................................................73
6.2 Replacing the Roller Set.............................................................................................................................74
The inside of the ADF becomes very hot when the
scanner is being used.
Before you replace the consumables, make sure
you turn off the power, unplug the power cable and
wait at least 15 minutes for the inside of the ADF to
cool down.
To Next Page
Loading...
