Fujitsu Fi-7030 User Manual

Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
22
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
When you start a scan, documents that are loaded in the ADF
paper chute (feeder) are fed into the ADF one by one.
Using the chute extensions will keep the documents straight
and feed them smoothly.
1 Pull out the chute extensions.
1.5 Setting Up the ADF Paper Chute (Feeder)
HINT
Make sure to hold the scanner while you pull out the chute
extensions.
Chute Extension 2
Chute Extension 1

Fujitsu Fi-7030 Specifications

General

Optical Resolution	600 dpi
ADF Capacity	50 sheets
Interface	USB 2.0
Duplex Scanning	Yes
Scanner Type	ADF (Automatic Document Feeder)
Supported Paper Size	A4, A5, A6, B5, B6, Letter, Legal
Scanning Method	Color
Scan Speed (Color, A4, 200 dpi)	30 ppm / 60 ipm
Power Consumption	Operating: 18 W or less
Scanning Speed	30 ppm / 60 ipm
Daily Duty Cycle	Up to 4, 000 sheets