Fujitsu Fi-7030 User Manual

How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Appendix
Appendix
Glossary
Introduction
Index
Contents
144
How to Load
Documents
Scanner
Overview
TOP
A.1 Basic Specification
Item Specification Notes
Scanner Type ADF -
Image sensor Color CIS × 2 (front, back) -
Light source RGB3 Color LED × 2 (front, back) -
Scanning
area
Minimum size
(width × length)
50.8 × 50.8 mm -
Maximum size
(width × length)
216 × 355.6 mm (*1)
Paper Weight (Thickness)
40 to 209 g/m
2
(11 to 56 lb)
127 to 209 g/m
2
(34 to 56 lb) for A8 size
0.76 mm (0.03 in.) or less for plastic cards (embossed cards can be used)
(*2)
-
Scanning
speed
(A4
landscape)
(*3)
Binary (black &
white)
Simplex: 27 ppm
Duplex: 54 ipm
300 dpi
Grayscale
Color
Loading capacity (*4) 50 sheets
Paper weight: 80 g/m
2
(20 lb)
Total thickness: 5 mm (0.2 in.) or
less
Optical resolution 600 dpi -
Output
resolution
Binary (black &
white)
50 to 600 dpi, 1200 dpi 50 to 600 dpi: configurable in 1 dpi
increments
1,200 dpi: created by scanner driver
Grayscale
Color

Fujitsu Fi-7030 Specifications

General

Optical Resolution	600 dpi
ADF Capacity	50 sheets
Interface	USB 2.0
Duplex Scanning	Yes
Scanner Type	ADF (Automatic Document Feeder)
Supported Paper Size	A4, A5, A6, B5, B6, Letter, Legal
Scanning Method	Color
Scan Speed (Color, A4, 200 dpi)	30 ppm / 60 ipm
Power Consumption	Operating: 18 W or less
Scanning Speed	30 ppm / 60 ipm
Daily Duty Cycle	Up to 4, 000 sheets