Fujitsu Fi-7030 - Operational

Chapter 6 Replacing the Consumables
Appendix
Glossary
Introduction
Index
Contents
TOP
75
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
Replacing the
Consumables
2 Remove the brake roller.
Lift the right side of the roller first, then pull out the shaft from the
slot on the left.
3 Remove the brake roller from its shaft.
4 Attach a new brake roller on the shaft.
Insert the protrusion on the shaft into the slot.
5 Attach the shaft back in the scanner.
Insert the left end of the shaft into the hole in accordance with the
hole shape, and then attach the right side of the shaft.
2
1
Shaft
Brake Roller
Shaft
Brake Roller
Slot
Protrusion
Shaft
Brake Roller
2
1
Shaft
Brake Roller